Markbass Little Mark IV

Ei arvosteluita | Arvostele tämä tuote / 5
Hinta: 539,00 53900
Määrä: kpl
Little Mark IV -vahvistimiin on lisätty upeita ominaisuuksia verrattuna Markbass-sarjan aiempaan lippulaivaan, Little Mark III:een, joka on ollut alan standardi soundin, kannettavuuden ja hinta-laatusuhteen osalta.

Tässä vahvistimessa käytettävä kaksikaistainen limitteri reagoi nopeammin ja dynaamisemmin soittoosi. Sen parina on 500 watin päätevahvistin, joka tuottaa erittäin tarkan bassotaajuuksien toiston Markbassin oman MPT-vahvistinteknologian ansiosta, joka on suunniteltu erityisesti bassolle.

Lisäksi Little Mark IV:ssä on mute-kytkin sekä 3-asentoinen kytkin, jossa on kolme EQ-vaihtoehtoa: Flat, Scooped tai FSW (jalkakytkimellä ohjattava).
Updated 4 band EQ, Old School filter, 3 way switch
Our updated 4 band EQ section features very effective controls allowing you to easily find the sound you want, boosting or cutting up to 16dB for each of the 4 bands to cover all the tonal nuances needed in any genre of music. Additionally the Old School filter cuts your high frequencies and gives a round and smooth tone. The 3 way rotary-switch allows you to choose between a super-balanced flat tone, a scooped preset that drops the mids while boosting the lows and highs - giving a superb slap sound, or lastly the 'FSW' option to control both mute and the Scooped EQ on demand by connecting an optional dual footswitch.

Bi-band limiter
Our new bi-band limiter responds faster and more dynamically to your playing than traditional limiters do and lets your high end "breathe" for a more natural sound. It makes our amp heads the best choice for anyone who enjoys a quick, punchy attack at high volumes.

MUTE / LINE OUT LEVEL CONTROL / PRE-POST EQ switch
Featured on the front panel of the Little Mark IV series amps are a convenient mute switch, along with the Line Out level control knob that allows for precise control of the signal sent to the mixer/ PA. On the rear panel is a Pre-Post EQ switch allowing you to set the XLR output's routing to before or after your EQ as required.

MPT - MARK PROPRIETARY TECHNOLOGY
Many other bass amps on the market use power amps that are not specifically designed for bass. At Markbass, Marco De Virgiliis invested heavily in R&D to develop proprietary power amp technology in house. Our MPT power amp was built from the ground up to respect and elevate the inherent tone of your instrument.

Minimum ohm load for all Markbass heads is 4 ohms.
Markbass amps/combos are manufactured to be sold and used in the country of purchase, and they are factory preset to that country’s voltage. Due to homologation issues, the voltage may not be changed.

INPUTS

    INPUT impedance: 1 Mohm, max. voltage: 9 Vpp
    RETURN impedance: 22 Kohm, max. voltage: 10 Vpp

CONTROLS

    GAIN –46 dB to +23 dB range
    LINE OUT level control on front panel
    PRE/POST EQ (for line out) switch on rear panel
    GROUND LIFT switch on rear panel
    MUTE SWITCH
    MASTER VOLUME

EQUALIZATION

    LOW: center frequency 68 Hz; level: ±16 dB
    MID LOW: center frequency 360 Hz; level: ±16 dB
    MID HIGH: center frequency 800 Hz; level: ±16 dB
    HIGH: center frequency 10 kHz; level: ±16 dB
    OLD SCHOOL: max cut range: 250 Hz – 20 kHz
    3 WAY SWITCH: flat/scooped-mid/FSW

OUTPUTS

    SEND EFFECTS: unbalanced, max. voltage 20 Vpp
    TUNER OUT: unbalanced, max. voltage 2 Vpp
    LINE OUT balanced XLR, max. voltage 20 Vpp
    SPEAKER OUT: speakon/1/4” combo, 1/4”*

DIMENSIONS AND WEIGHT

    HEIGHT: 2 rack units (3.27 in. / 83 mm)
    WIDTH: 10.87 in. / 27.6 cm (19 in. / 48.3 cm with optional rack ears)
    DEPTH: 9.84 in. / 25 cm
    WEIGHT: 5.4 lbs / 2.450 kg

OTHERS

    BI-BAND LIMITER
    FOOTSWITCH (OPTIONAL): FLAT/SCOOPED-MID
    OUTPUT POWER: 500W RMS @ 4 ohm, 300W RMS @ 8 ohm
Arvostele tämä tuote

Tälle tuotteelle ei ole vielä annettu arvosteluita.